Tata Hitachi EH 600 Base

Specifications of Tata Hitachi EH 600 Base

Engine

• Aspiration Turbocharged
• Bore & stroke 140X152 (mm)
• Displacement 14 lts
• Engine Model Cummins NTA 14C
• Maximum Torque 1857 Nm (SAE 1995 @ 1400 rpm)
• Net Power 283 kW (380 HP)
• No of cylinders 6
• Power - Gross 298 kW (400 HP) @ 2100 rpm (SAE 1995 @ 2100 rpm)
• Starting device Electric
• Type cycle high torque diesel

Body Capacities

• Heaped volume 2:1 (SAE) 21.0 cu.m.
• Heaped volume 36:1 (SAE) 18.9 cu.m.
• Struck volume (SAE) 14.6 cu.m.

Transmission

• Torque Converter Type Allision TC498. Torque converter integral with transmission with lock-up on gears (expept reverse).
• Transmission Allision CLT 754. Automatic plantetary type transmission.

Service Refill Capacities

• Cooling System 90.0 L
• Crankcase (including filters) 37 ltr
• Fuel Tank 550.0 L
• Hydraulic System (including Tank) 260.0 L
• Hydraulic Tank 195.0 L
• Rear axle, total 60.0 L
• Transmission (including filters) 40.0 L

Hydraulic System

• Brake cooling pump flow 440 lpm
• Hoist One three stage telescopic cyclinder, two stages are double-acting. A hoist into the cyclinder
• Hydraulic Flow 206 lpm (@ 2100 rpm engine speed)
• Hydraulic system : Load-sensing hydrostatic system. One engine driven piston pump mounted on the transmission’s power take-off. Common pumps and reservoir for steering and hoist. Steering is always given priority over the hoist system
• Lower time 12 secs
• Raise time with load 12 secs
• Relief pressure 19 Mpa

Tires

• Standard (Front and Rear) Bias Ply 18.00-25(32) E3

Brakes

• Parking Brake drum mounted on transmission output flange. controlled by a toggle switch on the dash. Automatically applied if brake air pressure is lost
• Secondary brake Two independent circuits within service brake system provider back-up stoping capability. System is manually applied to stop machine within prescribed braking distance
• Service All air-over-oil actuated front disc brakes and rear oil cooled wet disc.