Sany SY220C-9HD Hydraulic Excavator

Specifications of Sany SY220C-9HD Hydraulic Excavator

Engine

• Battery 2 X 12 V
• Displacement 5.86
• Max. Torque 590N.m @ 1400 rpm
• Model SANY Mitsubishi D06S2
• Rated Engine Power 153 HP (114 kW) @ 2050 гpm
• Type 6 Cylinder, Inline, Water Cooled

Service Refill Capacities

• Engine Oil 22 L
• Fuel Tank 340 L
• Hydraulic Tank 239 L (Tank) 180 L (Refill)
• Radiator 29 L
• Swing device 4L
• Travel device 2×5.5 L

Hydraulic System

• Main pumps 2 Variable Displacement Axial Piston Pumps
• Max. Flow 2 X 220 lpm
• Pilot pump 1 Gear Pump

Undercarriage

• Lower Roller (Each side) 8
• Std. Arm 2400mm
• Std. Boom 5700mm
• Std. Bucket 1.0 m³ GP
• Std. Track 600mm
• Track Guard(each Side) 1
• Track Shoes (Each Side) 47
• Upper Roller (Each side) 2

SWING SYSTEM

• Swing motor 1 Axial Piston Motor with Swing Holding Brake
• Swing speed 11 rpm

DIGGING FORCES

• Arm Crowding Force 137 kN
• Bucket DIGGING FORCES 152 kN

WORKING RANGE

• Max Height at min swing radius 7680
• Max. Cutting Height 9113
• Max. digging depth 6037
• Max. digging reach 9312
• Max. dumping height 6252
• Max. Height at Min. Swing Radius 3730

Travel System

• Gradeability 70%/35°
• Ground Pressure 47 kPa
• Max traction force 209 kN
• Max. Travel Speed (L/H) 5.4/3.3 km/h
• Travel Motors 2 Axial Piston Motor with Parking Brake

RELIEF VALVE SETTINGS

• Implement Circuit 34.3 Mpa
• Pilot Circuit 3.9 Mpa
• Swing Circuit 25.5 Mpa
• Travel Circuit 34.3 Mpa

Dimension

• Distance between Tumbles 3445
• Min. Ground Clearance 440
• Overall Height 3440
• Overall Height of Cab 3075
• Overall Length 9650
• Overall Width 2980
• Rear-end Swing Radius 2900
• Std. Track Shoe Width 600
• Track Gauge 2380
• Under Carriage Length 4250
• Upper Width 2875

CONTROL SYSTEM

• Control Hydraulic System Positive Flow
• Control System DOMCS Intelligent Controller
• Remote Monitoring System GPRS, GPS, GIS
• Working Modes H. S. L. B