Sany SY210C-9 SPARC Excavators

Specifications of Sany SY210C-9 SPARC Excavators

Engine

• Battery 2 X 12 V
• Displacement 5.88 L
• Max. Torque 571 N.m @ 1300 rpm
• Model Cummins 6BT5.9-C140
• Rated Engine Power 140 HP(104 kW) @ 2000 rpm
• Type 6 Cylinder, Inline, Water Cooled

Service Refill Capacities

• Engine Oil 22.75L
• Fuel Tank 340 L
• Hydraulic Tank 239 L (Tank) 180 (Refill)
• Radiator 25.2 L
• Swing device 4L
• Travel device 2×5.5 L

Hydraulic System

• Main pumps 2 Variable Displacement Axial Piston Pumps
• Max. Flow 2 X 220 Ipm
• Pilot pump 1 Gear Pump

Undercarriage

• Lower Roller (Each side) 7
• Std. Arm 2400 mm
• Std. Boom 5700 mm
• Std. Bucket 1 m³ GP
• Std. Track 600 mm
• Track Guard(each Side) 1
• Track Shoes (Each Side) 45
• Upper Roller (Each side) 2

SWING SYSTEM

• Swing motor 1 Axial Piston Motor with Swing Holding Brake
• Swing speed 11 rpm

WORKING RANGE

• Max. Cutting Height 9113
• Max. digging depth 6037
• Max. digging reach 9312
• Max. dumping height 6252
• Max. Height at Min. Swing Radius 7680
• Min. swing radius 3730

Travel System

• Gradeability 70%/35°
• Ground Pressure 47.3 kPa
• Max traction force 209 KN
• Max. Travel Speed (L/H) 5.4/3.3 km/h
• Travel Motors 2 Axial Piston Motor with Parking Brake

RELIEF VALVE SETTINGS

• Implement Circuit 34.3 Mpa
• Pilot Circuit 3.9 Mpa
• Swing Circuit 25.5 Mpa
• Travel Circuit 34.3 Mpa

Dimension

• Distance between Tumbles 3260
• Min. Ground Clearance 465
• Overall Height 2955
• Overall Height of Cab 2930
• Overall Length 9395
• Overall Width 2800
• Rear-end Swing Radius 2720
• Std. Track Shoe Width 600
• Track Gauge 2200
• Under Carriage Length 4065
• Upper Width 2840

CONTROL SYSTEM

• Control System DOMCS Intelligent Controller
• Remote Monitoring System GPRS, GPS, GIS
• Working Modes HSLB