Sany STG140 BS5/STG170BS5 Motor Grader

Specifications of Sany STG140 BS5/STG170BS5 Motor Grader

Engine

• Displacement 4.5L
• Emissions CEV Stage V
• Engine Cummins
• Engine Power 150 HP (112 kW)/ 2200 rpm
• Model QSF4.5
• Operating Weight 14350 Kg
• Peak Torque 655Nm @ 1500 Rpm
• Rated Power 112 kw (150 Hp)
• Rated Rotation Speed 2200 rpm
• Standard Blade Length 12ft (3660mm

Dimension

• Basic Size: L*W*H 8360 mm x 2460 mm x 3356 mm
• Blade base - Front Axle to Moldboard 2500
• Front and Rear Axle Base 5950 mm
• Ground Clearance at Rear Axle 410
• Height of Top of Cab 3356
• Height to exhaust stack 2821
• Height to Top of cylinder 2724
• Length - Between Tandem Axles 1550
• Length - Front Tire to Rear of Machine 8360
• Middle and Rear Wheel Base 1538 mm
• Min. Ground Clearance 410 mm
• Overall Length - Front Dozer Blade to Ripper 10600
• Wheel base - Front Axle to Mid Tandem 6040
• Width - Outside Front Tires 2309
• Width - Outside Rear Tires 2460
• Width - Tire Centre Lines 2008

MASS LOAD

• Weight of basic machine 12650 kg
• Weight of the machine (with attachment) 14350 kg

OPERATING PARAMETER

• Blade Cutting Angle Range 25~75°
• Blade Height 620 mm
• Blade Length 3660 mm (12ft)
• Blade Max. Cuting Depth 650 mm
• Blade Max. Lifting Height 420 mm
• Blade Rotation Agle 360°
• Blade Tilt Angle ± 63

MOVING PARAMETER

• Articulation Steering Angle +25°
• Forward Speed 5/9/11/18/26/42 (km/h)
• Front Axle Swing Angle Up 16, down 16"
• Front Wheel Steering Angle ±45°
• Front Wheel Tilt Angle ±17
• Gears 6 forward and 3 reverse
• Min. Turning Radius 7.2 m
• Reverse Speed 5/11/26 (km/h)
• Tire 13X24" 12-PR

PERFORMANCE PARAMETERS

• Blade Down Force 65 kN
• DEF Tank Capacity 40 L
• Draw Bar Pull 83 kN
• Fuel Tank Capacity 280 L
• Hydraulic Oil Tank Capacity 120 L