Liugong 8128H wheel loaders

Specifications of Liugong 8128H wheel loaders

Engine

• Aspiration Turbocharged & Airto-air intercooled
• Displacement 19
• Emission rating Tier 3 / Stage IIIA
• Engine output - Max gross (SAE J1995 / ISO 14396) 419 kW (569 hp) @ 1,600 rpm
• Engine Output - Max net (SAE J1349 / ISO 9249) 398 kW (541 hp) @ 1,600 rpm
• Make Cummins
• Model QSK19
• Number of Cylinders 6
• Peak Torque 2,644 N · m @ 1,500 rpm

Transmission

• Maximum travel speed - forward 36 km/h
• Maximum travel speed - reverse 36 km/h
• Number of Forward Speeds 4
• Number of Reverse Speeds 4
• Torque Convertor Single stage, three elements, free wheel stator
• Transmission Type Countershaft, power shift

Service Refill Capacities

• Axles (each) 115 L
• Cooling System 95 L
• Engine Oil 60 L
• Fuel Tank 667 L
• Hydraulic System 420 L
• Transmission & Torque converter 140 L

Steering

• Cylinder Bore 125 mm
• Maximum articulation ±43°
• Maximum flow 190 L/min
• Rod diameter 70 mm
• Smallest turn (over tire) 7,620 mm
• Steering configuration Articulated
• Steering cylinders 2
• Steering Relief Pressure 21 MPa
• Stroke 774 mm

Dimensions

• Cab Height 4,195 mm
• Ground Clearance 480 mm
• Length with Bucket Down 11,847 mm
• Turn angle, Either side 43°
• Turning Radius, Bucket Carry 8,620 mm
• Turning Radius, Outside Tyre 7,620 mm
• Wheel track 2,700 mm
• Wheelbase 4,550 mm
• Width over tyres 3,590 mm

Hydraulic System

• Controls 3 levers, finger control
• Dump Time 2.1 s
• Fastest Total Cycle Time 14.6 s
• Float Down Type 4.0 s
• Main Pump Type Piston
• Main Relief Pressure 26 MPa
• Raise 8.5 s

Axles

• Axle Oscillation ±12°
• Differential Front Type Differential, limited slip
• Differential Rear Type Open
• Model Kessler

Brakes

• Parking Brake Actuation External caliperdisc parking
• Parking brakes Hydraulic
• Service Brake Actuation Hydraulic
• Service Brake Type Wet Multi-Disc brake

ELECTRICAL SYSTEM

• Alternator rating 3,920 W / 70 A
• Batteries 2 x 12 V
• Battery Capacity 2 x 120 Ah
• Parking brake actuation 850 A
• Reserve capacity 230 min
• Starter motor output 8 kW
• Voltage 24 V

Sound & ENVIRONMENT

• Air conditioning 6 kW
• External sound level according to ISO 6395- 2008 112 dB(A)-- Travel mode
• Heating capacity 5.8 kW
• Sound level in cab according to ISO 6396- 2008/EN ISO 3744-1995 Sound level in cab
• Ventilation 9.2 m³

LOADER ARM PERFORMANCE WITH ATTACHMENT

• Bucket breakout force 395 kN
• Bucket rollback at carry 49°
• Bucket rollback at ground level 43°
• Bucket rollback at maximum height 56°
• Dump clearance at full height discharge 3,910 mm
• Dump reach at full height discharge 2,050 mm
• Maximum digging depth, bucket level 137 mm
• Maximum dump angle at full height 45°
• Maximum hinge pin height 5,649 mm
• Tipping load – full turn according to ISO 14397- 1:2007 32,600 kg
• Tipping load - straight according to ISO 14397- 1:2007 38,900 kg