Hyundai Equipment HX 360L base

Specifications of Hyundai Equipment HX 360L base

Engine

• Gradeability 35° (70%)
• Gross Horse Power 194 kW (260 HP) at 2,200 rpm
• Max Torque 1,150 Nm (848 lb.ft) at 1.300 rpm

Service Refill Capacities

• Engine Coolant 25
• Engine Oil 26.5
• Final Drive 8.0 (7.8)
• Hydraulic System 414

Operating Specifications

• Max Digging Depth 6,820 (224)
• Min. Swing Radius 4,620 (15' 2")

Dimensions

• Maximum Digging Height 10.190 (33' 4")
• Maximum Dumping Height 7,120 (23' 4")
• Overall length of crawler 4.940 (16' 2")
• Rear end length 3.510 (11'6")
• Tumbler distance (mm) 4,030 (13' 3")

Drive System

• Type 6 cylinder, water cooled, 4-cycle, turbocharged, charge air cooled, direct injection, mechanical controlled diesel engine.

Specifications

• Max digging reach on ground 10,580 (34'7")

Hydraulic System

• Hydraulic motors Swing Axial piston motor with automatic brake
• Hydraulic motors Travel Two speed axial pistons motor with brake valve and parking brake
• Implement Circuit 350 kgf/cm² (4,980 psi)
• Maximum flow. 2x315/min
• Parking Brake Multi wet disc
• Pilot circuit 40 kgf/cm² (570 psi)
• Swing circuit 300 kgf/cm² (4,270 psi)

Engine – Cat 3054C

• Displacement 8.3 (506 cu in)

Brakes

• Drive method Fully hydrostatic type
• Drive motor Axial piston motor, in-shoe design

Undercarriage

• No. of rail guards on each side 2 EA
• No. of shoe each side 48 EA
• Shoe width 600
• Track frame Pentagonal box type
• Track Shoe Width 600 (24)

DRIVE

• Drawbar Pull 32.011 kgf (70,572.17 lbf)
• Maximum Travel Speed 5km/hr (3.1mph)/3.1km/hr(1.92mph
• Net power 190 kW (255 HP) at 2,200 rpm

TRANSPORT DIMENSIONS

• Overall Length 11,340 (37' 2")

WEIGHT

• Operating Weight 35500 kg

SERVICE CAPACITIES

• Fuel Tank 600

AXLES (FRONT/REAR)

• Make/Model HYUNDAIVHM8.3

Pipelaying Equipment

• Boom Length 6.45 m (21' 2")

TRACK

• Track gauge 2,590 (85)

SWING SYSTEM

• Swing bearing lubrication Grease-bathed
• Swing brake Multi wet disc
• Swing motor Fixed displacement axial piston motor
• Swing reduction Planetary gear reduction
• Swing speed 11.2 rpm

WORKING RANGE

• Maximum Digging Reach 10,710 (35' 1")

BACKHOES

• Arm Length 2.65 m (8' 7")
• Ground clearance, minimum 500 (118)

Chassis and Swivel Gear

• Ground pressure 0.68 kg/cm2 (9.69 psi)

Dimensions (Approximate) – Long Stick

• Tail Swing Radius 3.570 (11'9")