Escorts RT40 40 T

Specifications of Escorts RT40 40 T

Engine

• Engine Cooling System Water Cooled
• Engine Make/Model H6C41802v2 / H6C518022
• Engine Maximum Power at Rated RPM (kW) 135
• Fuel Tank Capacity 250 liter
• Fuel Type Diesel
• Max Torque at Rated RPM (Nm) 700
• No of Cylinders (Nos) 6
• Rated RPM at Engine Maximum Power (@rpm) 2200
• Rated RPM at Max Torque (@rpm) 1400-1700
• Type of Aspiration Turbocharged
• Vehicle Emission Compliance CEV Stage IV / CEV Stage V

Dimensions

• Front Tyres Size Designation with Ply Rating (mm) 18.00x25-32PR
• Gradeability in % (Unladen) 45
• Minimum Ground Clearance (Tolerance ±10%) (mm) 380 millimeter
• Number of Tyres per Axle 2
• Overall Length (Tolerance ±10%) (mm) 12900 millimeter
• Overall Width (Tolerance ±10%) (Over Tyre) (mm) 3100 millimeter
• Rear Tyres Size Designation with Ply Rating (mm) 18.00x25-32PR
• Type of Tyre Pneumatic Industrial / Earthmovers
• Weight of Equipment (Unladen weight, kg (weight in travel mode with 90% fuel, accessories and tools) as per CMVR Certificate) 35200 kilogram
• Wheel Base (Tolerance ±10%) (mm) 4000 millimeter

General Data

• Overall Height 3650 millimeter

ELECTRICAL SYSTEM

• Type 24 volt system

Performance Data

• Maximum Lift Capacity at specified radius from the centre of slew free on wheel (360 deg slew) 13 tonne
• Maximum Lift Capacity at specified radius from the centre of slew on mobile over front (upto 4km/hr speed) 20 tonne
• Maximum Speed (Unladen) (km/h) 27
• Minimum Turning Radius as per CMVR (mm) (Tolerance ±10%) 7200 millimeter
• Number of Outriggers 4
• Rated Lift Capacity at specified radius from the centre of slew on fully extended outriggers (360 deg slew) 40 tonne
• Slewing Speed (RPM) (Tolerance ±10%) 2
• Specified radius from the centre of slew 3 meter
• Type of Power Steering Four wheel Steering
• Type of Wheel Drive Four wheel Drive

Constructional Parameters

• Additional Content Head & tail light assembly,Reverse gear hooter annunciator/reflectors,Tools kits,Fire extinguisher,Operator,s Manual and Parts Catalogue should be provided by the manufacturer/Vendor
• Adjustable driver seat Yes
• Auxiliary Brake Hydraulic Brakes on All Wheels
• Axle Front Axle: Drive & Steer with differential & Planetary reduction hubs, rigid frame mounted. AND Rear Axle: Drive & steer with differential & planetary reduction hubs, centrally pivoted, lateral oscillating with hydraulic locking device
• Battery Rating 2x12V/180 AH
• Battery Type Wet
• Boom 4 part boom, 3 part hydraulically operated, 4th part power extended and manually pinned for safety
• Cabin Instrumental panel with audio indicators / visual indicators Yes
• Door with toughened glass and locking mechanism Yes
• Electrical Alternator & Starter 24V/100AH Alternator & Starter 24V
• Front screen wiper Yes
• Hoist Mechanism Hydraulic Winch with axial piston motor, grooved drum & planetary reduction gear box.
• Hoist Speed Single Line (Unladen) (Tolerance ±10%) (Mtrs/Min) 58
• Hook Block 1 No. 40 MT swivel type hook block with 4 sheaves reeved for 8 part line with safety latch.
• Hydraulic Oil change period (in hours) 2000 hour
• Instrument Panel Hour Meter,Fuel Gauge / Indicator,Coolant Temperature Gauge / Indicator,Battery Not Charging Indicator,Low Engine Oil Pressure Indicator,Horn
• Lights Front Lights,Rear Lights,Parking Lights,Brake Lights,Indicators Lights,Cabin Lights
• Maximum Boom Elevation Angle (Degree) 80
• Minimum Boom Elevation Angle (Degree) -2
• Number of Forward Gears (Nos) 6
• Operator Cabin Single Revolving Cabin fully enclosed wide view
• Paint Standard automobile paint to the exterior body as per CVMR rules
• Parking Brake Type Hand operated switch/lever, spring applied hydraulically released front axle mounted disc brake.
• Rear view mirror Yes
• Reverse Alarm Yes
• Rope Length 180 meter
• Safety System Safe load indicator with hydraulic cut off,Safety brakes on hoist,Hose protection failure device,Over hoist & over load cut off
• Service Brake Type Foot operated, hydraulically applied pneumatically assisted split circuit disc brake on all wheels.
• Slew Movement 360 deg continuous rotation Yes
• Type of Gear Box Powershift Transmission with Torque Converter

Warranty

• Equipment Warranty Time (Month) 12 month
• Operating hours during warranty period 1000 hour

Certification & Testing Parameters

• Compliance to Latest CMVR Yes
• Conformity to Standard IS 4573 latest
• Load Test Certificate Manufacturer's load test certificate as per IS 4573 to be provided
• Specify type test certifying agency in case of "Other" or put "NA" NA
• Type Test Certificate Date (dd/mm/yyyy) 21/05/2021
• Type Test Certificate Number AAQN0212
• Type Test Certifying Agency ARAI