Caterpillar AD30 Underground Mining Trucks

Specifications of Caterpillar AD30 Underground Mining Trucks

Engine

• Bore 137.2 mm
• Displacement 15.2 L
• Engine Model Cat® C15 ACERT™
• Gross Power – SAE J1995 304.0 kW
• Net Power – 80/1269/EEC 281.0 kW
• Net Power – ISO 9249 281.0 kW
• Net Power – SAE J1349 281.0 kW
• Stroke 171.5 mm

Weights

• Empty 28870.0 kg
• Front Axle 19479.0 kg
• Front Axle 26513.0 kg
• Loaded 60000.0 kg
• Rear Axle 9391.0 kg
• Rear Axle 33487.0 kg

Body Capacities

• Body 1 17.5 m3
• Body 2 11.3 m3
• Body 3 14.4 m3
• Ejector Body 15.2 m3
• Wide Body 16.8 m3

Transmission

• Forward 1 6.8 km/h
• Forward 2 12.3 km/h
• Forward 3 22.3 km/h
• Forward 4 40.8 km/h
• Reverse 1 7.8 km/h

Service Refill Capacities

• Cooling System 74.0 L
• Engine Crankcase with Filter 34.0 L
• Front Differentials and Final Drives 56.0 L
• Fuel Tank 500.0 L
• Hydraulic Tank 330.0 L
• Rear Differentials and Final Drives 56.0 L
• Transmission 67.0 L

Body Hoist

• Lower 11.2 Seconds
• Raise 10.5 Seconds
• Total Cycle Time 21.7 Seconds

Operating Specifications

• Gross Machine Operating Weight 60000.0 kg
• Nominal Payload Capacity 30000.0 kg

Dimensions

• Centerline of Front Axle to Centerline of Hitch 1800.0 mm
• Dump Clearance 558.0 mm
• Front Axle to Front Bumper 3345.0 mm
• Ground Clearance 400.0 mm
• Height to Top of Body 2547.0 mm
• Height to Top of Load (2:1) 3133.0 mm
• Height to Top of ROPS 2600.0 mm
• Loading Height 2385.0 mm
• Max Overall Length 10743.0 mm
• Overall Height – Body Raised 5602.0 mm
• Overall Length 10153.0 mm
• Overall Tire Width 2650.0 mm
• Overall Width 2650.0 mm
• Rear Axle to Tail 1608.0 mm
• Rear Wheel to Body Raised 1061.0 mm
• Tunnel Clearance Height 4000.0 mm
• Tunnel Clearance Width 4000.0 mm
• Wheelbase 5200.0 mm

Tires

• Tire Size 26.5 × R25 MS VSNT E4

Brakes

• Standards ISO3450, AS2958.1, CAN-CSA424.30-M90

Weight Distribution

• Front Axle 1 67.5 %
• Front Axle 2 44.2 %
• Rear Axle 1 32.5 %
• Rear Axle 2 55.8 %

Final Drives

• Differential Ratio 3.38:1
• Final Drive Ratio 4.76:1
• Total Reduction Ratio 16.13:1

Turning Dimensions

• Articulation Angle 42.5 Degrees
• Axle Oscillation 10.0 Degrees
• Inner Clearance Radius 5030.0 mm
• Outside Clearance Radius 8571.0 mm