
Caterpillar 986H (Net Power- 305.0 kW) Block Handler Arrangement
Ex-showroom Price
Price not available
Variants
Specifications of Caterpillar 986H (Net Power- 305.0 kW) Block Handler Arrangement
Engine
- Displacement 15.2 L
- EEC 80/1269 305.0 kW
- Emissions Tier 2
- Engine Model Cat® C15 ACERT™
- Gross Power – SAE J1995 335.0 kW
- ISO 14396 at Rated Speed 329.0 kW
- ISO 9249 at Rated Speed (assumes standard ambient fan) 305.0 kW
- Net Power 305.0 kW
- Net Power – ISO 9249 305.0 kW
- Peak Torque @ 1,200 rpm 2320.0 N·m
- Rated Speed 1800.0 RPM
- SAE 1349 at Rated Speed (assumes standard ambient fan) 305.0 kW
- SAE J1995 at Rated Speed 335.0 kW
- Stroke 171.5 mm
- Torque Rise 37.0 %
Transmission
- Direct Drive – Forward 2 12.7 km/h
- Direct Drive – Forward 3 22.0 km/h
- Direct Drive – Forward 4 39.0 km/h
- Direct Drive – Reverse 2 14.1 km/h
- Direct Drive – Reverse 3 25.0 km/h
- Forward 1 7.3 km/h
- Forward 2 12.2 km/h
- Note Travel speeds based on R35/65-33 tires.
- Reverse 1 7.6 km/h
- Reverse 2 13.6 km/h
- Transmission Type Cat planetary power shift
Service Refill Capacities
- Axle Oil 356.0 L
- Cooling Systems 90.0 L
- Crankcase 34.0 L
- Differentials and Final Drives – Front 186.0 L
- Differentials and Final Drives – Rear 170.0 L
- Fuel Tank 481.0 L
- Hydraulic System (tank only) 125.0 L
- Hydraulic System Factory Fill 330.0 L
- Transmission 75.0 L
Operating Specifications
- Operating Weight 48429.0 kg
Axles
- Front Fixed
- Oscillation Angle ±12.5°
- Rear Trunnion
Brakes
- Brakes SAE J1473 OCT90, ISO 3450:1992
HYDRAULIC SYSTEM - LIFT/TILT
- Lift Cylinder – Bore 190.0 mm
- Lift Cylinder – Stroke 1138.0 mm
- Lift/Tilt System – Circuit Load Sense
- Lift/Tilt System Pumps 2 × 110 cc variable displacement
- Maximum Flow at 2,165 rpm 470.0 L/min
- Relief Valve Setting – Lift/Tilt 27900.0 kPa
- Tilt Cylinder – Bore 190.0 mm
- Tilt Cylinder – Stroke 568.0 mm
HYDRAULIC SYSTEM - STEERING
- Maximum Flow @ 2,284 rpm 200.0 L/min
- Steering Cutoff Pressure 27600.0 kPa
- Steering System – Circuit Load Sense
- Steering System – Pump Piston, variable displacement
- Total Steering Angle 70.0 Degrees
Hydraulic Cycle Time
- Dump 3.0 Seconds
- Lower 4.9 Seconds
- Lower Float Down 4.3 Seconds
- Rackback 4.5 Seconds
- Raise 8.5 Seconds
- Total Hydraulic Cycle Time 15.8 Seconds
Select Equipment Dealers by Brand and City
Caterpillar 986H (Net Power- 305.0 kW) Block Handler Arrangement Reviews
Overall
Based on 0 Reviews
Write Review