Caterpillar 814F Series 2 Wheel Excavators

Specifications of Caterpillar 814F Series 2 Wheel Excavators

Engine

• Bore 112.0 mm
• Cylinders 6
• Displacement 8.8 L
• Engine Model Cat® C9 ACERT™
• Flywheel Power 173.0 kW
• Gross Power 189.0 kW
• Net Power 173.0 kW
• Net Power – EEC 80/1269 175.0 kW
• Net Power – ISO 9249 175.0 kW
• Net Power - SAE J1349 (JAN90) 173.0 kW
• Stroke 149.0 mm
• Torque Rise 30.0 %

Weights

• Operating Weight 21713.0 kg

Transmission

• Forward 1 5.7 km/h
• Forward 2 10.2 km/h
• Forward 3 17.9 km/h
• Forward 4 31.0 km/h
• Number of Forward Speeds 4
• Number of Reverse Speeds 4
• Reverse 1 6.5 km/h
• Reverse 2 11.6 km/h
• Reverse 3 20.4 km/h
• Reverse 4 34.9 km/h

Service Refill Capacities

• Cooling System 55.0 L
• Crankcase 34.0 L
• Differentials and Final Drives – Front 65.0 L
• Differentials and Final Drives – Rear 65.0 L
• Fuel Tank – Standard 446.0 L
• Hydraulic Tank 88.0 L
• Transmission 50.0 L

Steering

• Steering Angle ±36°
• Turning Radius, Inside Corner of Blade 3727.0 mm
• Turning Radius, Outside Corner of Blade 7168.0 mm

Operating Specifications

• Ground Clearance 366.0 mm
• Turning Circle w/Blade 1433.6 m

Dimensions

• Center Line of Rear Axle to Edge of Bumper 1871.0 mm
• Center Line of Rear Axle to Hitch 1675.0 mm
• Ground Clearance 366.0 mm
• Ground Clearance to Bumper 748.0 mm
• Height to Bottom of Ladder 441.0 mm
• Height to Top of Cab 3326.0 mm
• Height to Top of Exhaust Pipe 3304.0 mm
• Height to Top of Hood 2373.0 mm
• Length with Blade on Ground 6881.0 mm
• Wheelbase 3350.0 mm

Hydraulic System

• Lift cylinder, bore and stroke 120.62 mm x 913.9 mm 4.74 in x 35.98 in
• Relief Valve Setting 15500.0 kPa
• Steering cylinder, bore and stroke 101.6 mm x 597 mm 3.99 in x 23.5 in

Tires

• Standard Tire Size 26.5 R25 XHA MX L3
• Tires L3 rock tread

Axles

• Front Fixed
• Rear Oscillating ±12°

Brakes

• Brakes Meet OSHA regulations

Sound Performance

• Standards Meet required standards

Cab

• Cab Meets SAE and ISO standards
• ROPS/FOPS Standard

BLADE SPECIFICATIONS

• Blade Capacities 2.66 m3
• Blade Tilt Angle - Left 8.0 Degrees
• Blade Tilt Angle - Right 4.5 Degrees
• Blade Tip Angle - Back 4.5 Degrees
• Blade Tip Angle - Forward 10.0 Degrees
• Blade Tip Angle - Total 51.9 Degrees
• Maximum Lift Above Ground 718.0 mm
• Moldboard Length 3596.0 mm
• Straight Blade - Capacity 2.66 m3
• Straight Blade - Digging Depth 528.0 mm
• Straight Blade - Maximum Tilt 795.0 mm
• Straight Blade - Overall Width 3596.0 mm
• Straight Blade - Total Operating Weight 21713.0 kg
• Straight Blade - Height 1110.0 mm