Caterpillar 725C Base

Specifications of Caterpillar 725C Base

Engine

• Bore 115.0 mm
• Displacement 9.3 L
• Engine Model Cat C9.3 ACERT
• Engine Model – U.S. EPA Tier 2 FinalEngine Model – U.S. EPA Tier 2 Final/EU Stage II Cat® C9.3 ACERT™
• Gross Power – SAE J1995 239.0 kW
• Net Power – ISO 14396 236.0 kW
• Net Power – SAE J1349 234.0 kW
• No Engine De-rating Required Below 2290.0 m
• Peak Engine Torque Gross (SAE J1995) 1590.0 N·m
• Peak Engine Torque Net (ISO 14396) 1573.0 N·m
• Peak Engine Torque Speed 1200.0 RPM
• Stroke 149.0 mm

Weights

• Rated Payload 23.6 tonnes

Body Capacities

• Heaped SAE 2:1 14.8 m3
• Struck 11.0 m3
• Tailgate Heaped SAE 2:1 15.6 m3
• Tailgate Struck 11.1 m3

Transmission

• Forward 1 8.0 km/h
• Forward 2 15.0 km/h
• Forward 3 22.0 km/h
• Forward 4 34.0 km/h
• Forward 5 48.0 km/h
• Forward 6 56.0 km/h
• Reverse 1 9.0 km/h

Sound Levels

• Interior Cab 76.0 dB(A)

Operating Weights

• Center Axle – Empty 4610.0 kg
• Center Axle – Loaded 15180.0 kg
• Center Axle – Rated Load 10570.0 kg
• Front Axle – Empty 14050.0 kg
• Front Axle – Loaded 16510.0 kg
• Front Axle – Rated Load 2460.0 kg
• Rear Axle – Empty 4290.0 kg
• Rear Axle – Loaded 14860.0 kg
• Rear Axle – Rated Load 10570.0 kg
• Total – Empty 22950.0 kg
• Total – Loaded 46550.0 kg
• Total – Rated Load 23600.0 kg

Service Refill Capacities

• Cooling System 83.0 L
• Engine Crankcase 38.0 L
• Final Drives/Differential 135.0 L
• Fuel Tank 412.0 L
• Hydraulic System 110.0 L
• Output Transfer Gear Box 24.0 L
• Transmission 47.0 L

Body Hoist

• Lower Time 8.0 Seconds
• Raise Time 10.0 Seconds

Steering

• Lock to Lock 4.75 seconds @ 60 rpm

Standards

• Brakes ISO 3450 – 2011
• Cab/FOPS ISO 3449 Level II – 2005
• Cab/ROPS ISO 3471 – 2008
• Steering ISO 5010 – 2007

Body Plate

• Type High Strength Brinell HB450 Wear Resistant Steel

Turning Circle

• Note Dimensions are for machines equipped with 23.5R25 tires.
• Turning Dimensions – Aisle width 5332.0 mm
• Turning Dimensions – Clearance radius 8075.0 mm
• Turning Dimensions – Inside radius 3879.0 mm
• Turning Dimensions – SAE turning radius 7470.0 mm
• Turning Dimensions – Steer angle – left/right 45.0 Degrees