Caterpillar 216B Series 3 Base

Specifications of Caterpillar 216B Series 3 Base

Engine

• Bore 84.0 mm
• Displacement 2.2 L
• Engine Model Cat® C2.2
• Gross Power 38.0 kW
• Gross Power SAE J1995 38.0 kW
• Net Flywheel Power 35.0 kW
• Net Power EEC ISO 9249 35.0 kW
• Net Power SAE 1349 35.0 kW
• Stroke 100.0 mm

Weights

• Operating Weight 2581.0 kg

Service Refill Capacities

• Chain box, each side 6.0 L
• Cooling System 10.0 L
• Engine Crankcase 10.0 L
• Fuel Tank 58.0 L
• Hydraulic System 55.0 L
• Hydraulic Tank 35.0 L

Operating Specifications

• Breakout Force, Tilt Cylinder 1852.0 kg
• Rated Operating Capacity 635.0 kg
• Rated Operating Capacity w/Optional Counterweight 680.0 kg
• Tipping Load 1270.0 kg

Dimensions

• Bucket Pin Height at Carry Pos. 200.0 mm
• Bucket Pin Height at Max Lift 2854.0 mm
• Bumper Overhang - Rear Axle 967.0 mm
• Clearance at Max Lift and Dump 2169.0 mm
• Departure Angle 26°
• Ground Clearance 195.0 mm
• Height to Top of Cab 1950.0 mm
• Length w/Bucket on Ground 3233.0 mm
• Length w/o Bucket 2519.0 mm
• Max Overall Height 3709.0 mm
• Max. Reach w/Arms-Parallel 1291.0 mm
• Maximum Dump Angle 40°
• Rack Back Angle at Max Height 81°
• Reach at Max Lift and Dump 505.0 mm
• Turn Radius from Ctr - Bucket 1944.0 mm
• Turn Radius from Ctr - Coupler 1195.0 mm
• Turn Radius from Ctr - Rear 1502.0 mm
• Vehicle Width over Tires 1525.0 mm
• Wheelbase 986.0 mm

Hydraulic System

• Hydraulic Flow Standard
• Hydraulic Power 23.2 kW
• Loader Hydraulic Flow 61.0 L/min
• Loader Hydraulic Pressure 23000.0 kPa

Cab

• FOPS SAE J1043 SEPT87, ISO 3449:1992 Level I
• FOPS Level II SAE J231 JAN81, ISO 3449:1992 Level II
• ROPS SAE J1040 MAY94, ISO 3471:1994

Power Train

• Travel Speed Forward 12.7 km/h
• Travel Speed Reverse 12.7 km/h