BEML BL40 Base

Specifications of BEML BL40 Base

Engine

• Bore & stroke 140 x 165 mm
• Displacement 15.2 ltr
• Engine Make BEML
• Engine Model BS6D140-1
• Flywheel Power 224 kW (300 fhp) at 2100 rpm
• Maximum Torque 127.2 kgm @ 1500 rpm
• No. of cylinders 6
• Type Diesel, 4-cycle, water-cooled direct injection

Service Refill Capacities

• Cooling Systems 80
• Engine lub. oil 32
• Fuel Tank 445
• Hydraulic Tank 181
• Transmission & Torque converter 62

Hydraulic System

• Hydraulic pump andem gear pump
• Hydraulic Pump Capacity 410 l pm @ 2100 rpm
• Relief pressure 210 kg/cm² (20.6 MPa)

Tires

• Size (Front & Rear) 29.5 x 29-28 PR (L-3)

Brakes

• Emergency brake Automatically actuates when air pressure goes below the rated value.
• Parking brakes Dry disc type applied on intermediate shaft
• Service brakes Front -Wheel, enclosed, air over hydraulically actuated outboard mounted wet disc brakes, independent front & rear brake li

Power Train

• Travel Speed - Fwd. 1st 6.67
• Travel Speed - Fwd. 2nd 12.9
• Travel Speed - Fwd. 3rd 24.75
• Travel Speed - Rev. 1st 6.4
• Travel Speed - Rev. 2nd 12.57
• Travel Speed - Rev. 3rd 23.72

Electrical

• Alternator 24V, 45A
• Battery 2 x 12V, 200 Ah
• Starting motor 4V, 7.5 kW

STEERING SYSTEM

• Bore x Stroke 110 x 547.5 mm
• Minimum turning radius 8055 mm
• Quantity Two
• Relief pressure 175 kg/cm² (17.17 MP
• Type Centre pivot frame articulatio