ACE TM 550 Base

Specifications of ACE TM 550 Base

Weights

• Outriggers Four hydraulically operated outrigger fitted with lock valve. Outrigger blocks are removable and stowable. Fifth outrigger is also provided below the cabin.

Body Capacities

• Structure Fabricated with high tensile steel plates and is capable of unlimited slewing in either direction, Super structure is mounted on a sealed internal teeth slew ring.

Transmission

• Top Speed 49 Kmph.

Specifications

• Optional Equipment Side folding lattice jib-9 to 16 mtrs with three offset positions.

Tires

• Tyres Size 12.00 X 20-16 ply rating (12+1 Nos.)

Axles

• Brakes Air pressurized diaphragm operated with dual line arrangement. Flick valves operated pneumatic hand brake on rear and series brake for all wheels
• Clutch TSingle plate(381mm), Dry, hydraulic actuated diaphragm type
• Front 12200 kgs.
• Rear 26060 kgs.
• total weight 26060 kgs.

GENERAL SPECIFICATIONS

• Hydraulic tank capacity 700 Lts.

Capacity

• Hydraulic System Triple Gear pump driven by transmission P.T.O, supplies oil to all circuits except steering system.

Approximate Weights - Dual Slope

• Chassis Torsion proof chassis fabricated from high tensile steel plates. Outrigger boxes are integrated with the chassis. Drive is 8x4x4 (4 wheel drive and 4 wheel steer) • Full width driver cabin is provided with driver and co-driver seating arrangements.

Options

• Cabin Cabin with maximum all round vision is fitted, All controls for crane motion and electrical controls are provided in the cabin.Cabin is fitted with fan and lights.

BOOM

• Derricking Double acting hydraulic cylinder with counter balance safety valve.
• TELESCOPING BOOM Five part hexagon construction boom fabricated from high tensile plates and is extendable from 11,1m to 41.5m by twin double acting hydraulic cylinder. Counter balance valve is provided for both cylinders for safety of the load.
• TELESCOPING TIME 80-90 secs

Fuel Tank

• Engine Torsion proof chassis fabricated from high tensile steel plates. Outrigger boxes are integrated with the chassis. Drive is 8x4x4 (4 wheel drive and 4 wheel steer) • Full width driver cabin is provided with driver and co-driver seating arrangements.
• Fuel Tank Capacity 335 Lts.
• TRANSMISSION Nine speed synchromesh gear box with crawler gear and one speed reverse gear

Loader and Grapple

• Slewing Angle Piston type hydraulic motor drives a pinion through reduction gear unit. Double counter balance valve is provided for smooth control of operations.

Hoist System

• Hoist Single line speed 90 m/min.
• Hoist Rope 18 mm diameter,
• Hoist System Hoist winch is provided with piston type hydraulic motor driving grooved hoist barrel via reduction gear unit. The system is fitted with counter balance valve to control the speed of lowering and to hold the lifted load.
• Hook block 6 sheaves hook block is provided

Performance Data

• Derrick Angle 2° to 80°
• Derricking Time 45-80 secs (In & out)
• Slew 0-2 RPM