ACE TM 450 Base

Specifications of ACE TM 450 Base

Weights

• Outriggers Four hydraulically operated outriggers fitted with lock valves. Outrigger blocks are removable and stowable. Fifth outrigger is also provide below cabin

Body Capacities

• Structure Fabricated with high tensile steel plates and is capable of unlimited. slewing in either direction. Super structure is mounted on a sealed, internal teeth slew ring.

Transmission

• Top Speed 49 Kmph.

Specifications

• Optional Equipment Side folding lattice jib-8.5 +6.0 mtrs with three offset positions.

Tires

• Tyres Size 11.00 X 20-16 ply rating (12+1)

Axles

• Brakes Air pressurized diaphragm operated with dual line arrangement. Flick valves operated pneumatic hand brake on rear and front wheels.
• Clutch Single plate(381mm), Dry, hydraulic actuated diaphragm type
• Front 6035 kgs.
• Rear 25530 kgs.
• total weight 25530 kgs.

GENERAL SPECIFICATIONS

• Hydraulic tank capacity 700 Lts.

Capacity

• Hydraulic System Triple Gear pump driven by transmission P.T.O, supplies oil to all circuits except steering system.

Approximate Weights - Dual Slope

• Chassis Torsion proof chassis fabricated from high tensile steel plates. Outrigger boxes are integrated with the chassis. Drive is 8x4x4 (4 wheel drive and 4 wheel steer) Full width driver cabin is provided with driver and co-driver seating arrangement.

Options

• Cabin Cabin with maximum all round vision is fitted. All controls for crane motion and electrical controls are provided in the cabin. Cabin is fitted with fan and lights.

BOOM

• Derricking Double acting hydraulic cylinder with counter balance safety valve.
• TELESCOPING BOOM Double acting hydraulic cylinder is provided for boom telescoping. Four part boom is fabricated from high tensile steel plates and is extendable from 10.7 m to 33,2 m.
• TELESCOPING TIME 45-80 secs (In & out)

Fuel Tank

• Engine Mahindra Power or suitable, turbo charged, inter cooled diesel engine developing 274 bhp@ 2200 rpm
• Fuel Tank Capacity 335 Lts.
• TRANSMISSION Nine speed synchromesh Gear Box with crawler gear.

Loader and Grapple

• Slewing Angle Piston type hydraulic motor drives a pinion through reduction gear unit. Double counter balance valve is provided for smooth control and operations.

Hoist System

• Hoist Single line speed 90 m/min.
• Hoist Rope 18 mm diameter,
• Hoist System winch is provided with piston Hoist System type hydraulic motor driving grooved hoist barrel via reduction gear unit. The system is fitted with counter balance valve to control the speed of lowering and to hold the lifted load.
• Hook block 5 sheaves hook block is provided

Performance Data

• Derrick Angle -3° to 80°
• Derricking Time 45-80 secs (In & out)
• Slew 0-2 RPM