ACE TM 300 Base

Specifications of ACE TM 300 Base

Weights

• Outriggers Four hydraulically operated outrigger beams fitted with lock valves. Outrigger blocks are removable. and stowable.

Body Capacities

• Structure Fabricated with high tensile steel plates and is capable of unlimited slewing in either direction. Super structure is mounted on a sealed, internal teeth slew ring.

Transmission

• Top Speed 50 Kmph.

Specifications

• Optional Equipment Side folding lattice jib- 7.9 mtrs with three offset positions.

Tires

• Tyres Size 11.00 X 20-16 ply rating(12+1)

Axles

• Brakes Air pressurized diaphragm operated with dual line arrangement. Flick valves operated pneumatic hand brake on rear and front wheels.
• Clutch Single plate (381mm), Dry, hydraulic actuated diaphragm type
• Front 5900 kgs.
• Rear 20100 kgs.

Capacity

• Fuel Tank 335 Lts.
• Hydraulic System Triple Gear pump driven by transmission P.T.O, supplies oil to all circuits except steering system.

Approximate Weights - Dual Slope

• Chassis • Torsion proof chassis is fabricated from high tensile steel plates. Outrigger boxes are integrated with the chassis. Drive is 6x4 (4 wheel drive and 2 wheel steer) Full width driver cabin is provided with driver and co-driver seating arrangements.

Options

• Cabin Cabin with maximum all round vision is fitted, All controls for crane motion and electrical controls are provided in the cabin. Cabin is fitted with fan and lights.

BOOM

• Derricking Double acting hydraulic cylinder with counter balance safety valve.
• TELESCOPING BOOM Double acting hydraulic cylinder is provided for boom telescoping. Four part boom is fabricated from high tensile steel plates and is extendable from 10.5 m to 33.0 m.
• TELESCOPING TIME 80-90 secs

Fuel Tank

• Engine Turbo charged, inter cooled diesel engine developing 180 bhp@ 2200 rpm
• TRANSMISSION Nine speed synchromesh Gear Box with crawler gear.

Loader and Grapple

• Slewing Angle Piston type hydraulic motor drives a pinion through reduction gear unit. Double counter balance valve is provided for smooth control and operations.

Hoist System

• Hoist Single line speed 90 m/min.
• Hoist Rope 18 mm diameter.
• Hoist System Hoist winch is provided with piston type hydraulic motor driving grooved hoist barrel via reduction gear unit. The system is fitted with counter balance valve to control the speed of lowering and to hold the lifted load.
• Hook block 5 sheaves hook block is provided

Performance Data

• Derrick Angle -3° to 80°
• Derricking Time 45-80 secs (In & out)
• Slew 0-2 RPM