ACE TM 250 C Base

Specifications of ACE TM 250 C Base

Weights

• Outriggers Four hydraulically operated outrigger beams with vertical hydraulic jacks fitted with lock valves. Outriggers blocks are removable & stowable.

Body Capacities

• Structure Fabricated with high tensile steel plates and is capable of unlimited slewing in either direction. Super structure is mounted on a sealed, internal teeth slew ring.

Transmission

• Top Speed 60 Kmph.

Tires

• Tyres Size 10.00 X 20-16 PLY Rating (10+1)

Axles

• Brakes Air pressurized diaphragm operated with dual line arrangement. Flick valves operated pneumatic hand brake on rear wheels only.
• Clutch Dry, Single plate(380mm), hydraulically actuated diaphragm type
• Front 5990 kgs.
• Rear 20100 kgs.
• total weight 26090 kgs.

GENERAL SPECIFICATIONS

• Cabin Cabin with maximum all round vision is fitted, All controls for crane motion and electrical controls are provided in the cabin. Cabin is fitted with fan and lights.
• Hydraulic tank capacity 400 Its.

Capacity

• Hydraulic System Gear type hydraulic pump driven by transmission P.T.O, supplies oil to all circuits except steering system.

Approximate Weights - Dual Slope

• Chassis The crane alongwith auxillary chassis is mounted on suitable truck chassis

BOOM

• Derricking Double acting hydraulic cylinder with counter balance safety valve.
• TELESCOPING TIME 115 second

Boom System

• Telescopic Boom Reach - max Double acting hydraulic cylinder is provided for boom telescoping. Four part boom is fabricated from high tensile steel plates and is extendable from 10.2 m to 32.1 m.

Fuel Tank

• Engine Water cooled diesel engine developing 165 bhp@ 2400 rpm
• Fuel Tank Capacity 335 Its.
• TRANSMISSION Six speed synchromesh Gear Box

Loader and Grapple

• Slewing Angle Piston type hydraulic motor drives a pinion through reduction gear unit. Double counter balance valve is provided for smooth control and operations.

Hoist System

• Hoist Single line speed 90m/min.
• Hoist Rope 16 mm Diameter.
• Hoist System Hoist winch is provided with piston type hydraulic motor driving grooved hoist barrel via reduction gear unit. The system is fitted with counter balance valve to control the speed of lowering and to hold the lifted load.
• Hook block 4 sheaves hook block is provided

Performance Data

• Derrick Angle -3° to 80°
• Derricking Time 70 second (In and out)
• Slew 0-2.4 RPM.